Installation Instructions for 2007 Hyundai Elantra Cargo Net
Part List
- (1) Cargo Net
- (2) Eye Loop Bracket - Front (P/N: 85795-2H000-CH)
- (2) Eye Loop Bracket - Rear (P/N: 85795-2H100-CH)
Tools Required
- 10mm Wrench
- Needle Nose Pliers (Optional)
Time Required
Instructions
- 1 - Remove carpet lining from trunk, exposing the spare tire.
- 2 - Locate the four plastic plugs. See picture:
- 3 - Using needle nose pliers, carfuly remove all four plastic plugs.
- 4 - Position the eye loop brackets with the eye loop facing outward. (Front brackets - P/N: 85795-2H000-CH, Rear Brackets - P/N: 85795-2H100-CH). See Picture:
- 5 - Tighten all four bolts.
- 6 - Replace carpet lining (Note: Carpet may be slightly bunched due to the installation of the brackets)
- 7 - Place net in trunk so that the labeled strap (yellow label) is facing the left or the right side of the vehicle.
- 8 - Clip all four hooks to each eye loop.
|
